EN 1090 Structural Steel
Full support to achieve EN 1090 compliance and CE Marking for structural steel and aluminium products.

Our Support Includes
- EN 1090 gap assessment
- Factory Production Control (FPC) development
- Welding quality management
- Documentation support
- Inspection and testing controls
- CE Marking and Declaration of Performance
EN 1090 applies to:
Load-bearing structural steel and aluminium components that are permanently incorporated into buildings, bridges, industrial facilities and civil engineering works, and placed on the market as construction products under the Construction Products Regulation (EU) No 305/2011.
How we support you
Practical EN 1090 Structural Steel support
For companies manufacturing structural steel and aluminium components, EN 1090 compliance is an essential requirement for supplying products into the European construction market. CE Equipment Solutions supports fabricators, engineering companies, and metalwork manufacturers throughout Ireland with practical guidance, documentation support, and technical expertise — from initial gap assessment through Factory Production Control implementation to CE Marking.
Practical Implementation
Support focused on practical implementation rather than unnecessary paperwork, aligned with how your workshop actually operates.
Clear Guidance
Straightforward direction through certification requirements, execution classes, and notified body expectations at every stage.
Tailored Support
Systems and documentation designed around your specific manufacturing processes, products, and fabrication activities.
End-to-End Assistance
Continuous support from initial gap assessment through certification audit and CE Marking approval.
Team Ownership
We help your team understand and maintain compliance themselves, rather than depending on consultants long-term.
Irish Manufacturing Focus
Business-focused EN 1090 support designed specifically for Irish fabrication and engineering companies.
Key concepts
The terms that shape your certification
Execution Classes (EXC1–EXC4)
Execution Classes define the technical and quality requirements that apply to a fabricated product. EXC1 covers simple, lower-risk structures; EXC2 covers most commercial, residential, and industrial buildings; EXC3 covers complex structures with higher safety requirements; and EXC4 covers structures with very high consequences of failure, such as major bridges. The class is normally specified by the structural designer and determines the level of control, documentation, and competency required.
Factory Production Control (FPC)
Factory Production Control is the documented management system required by EN 1090 to ensure products are manufactured consistently and meet specified quality requirements. It covers purchasing, material traceability, production controls, welding management, inspection and testing, calibration, non-conformance management, and internal audits — and is the primary area assessed during certification.
Responsible Welding Coordinator (RWC)
Many companies implementing EN 1090 must appoint a Responsible Welding Coordinator to oversee welding activities. The RWC ensures welding procedures are followed, welders are appropriately qualified, welding quality is maintained, and inspection requirements are met. The level of technical knowledge required depends on the execution class and complexity of fabrication.
How the process works
Clear steps without the long scroll
Review the whole process at a glance, then expand the step that matters to you.
What we review
- Products and product range
- Manufacturing processes
- Welding activities
- Quality systems
- Existing documentation
What we define
- Materials manufactured
- Product types covered
- Applicable execution class (EXC1 to EXC4)
- Implementation roadmap
Training & Competency
- Employee training records
- Welding qualifications and certifications
- Competency assessments
- Induction, refresher, and role-specific training records
Factory Production Control (FPC) Manual
- Company scope and applicable EN 1090 requirements
- Organisational structure and responsibilities
- Description of manufacturing processes
- Control of materials, suppliers, and production
- Inspection, testing, and traceability arrangements
- Non-conformance, internal audit, and document control requirements
Quality Procedures & Work Instructions
- Document control procedure
- Purchasing and supplier approval procedure
- Material receipt and verification procedure
- Production, fabrication, and welding control procedures
- Inspection, testing, calibration, and maintenance procedures
- Control of non-conforming products and corrective actions
Material Control & Traceability
- Material certificates (e.g. 3.1 certificates)
- Supplier approval and incoming inspection records
- Material identification and heat number traceability records
- Cutting lists and fabrication records
- Stock control records
Calibration & Maintenance
- Calibration certificates and schedules for measuring equipment
- Equipment maintenance logs
- Verification, repair, and adjustment records
Document Control System
- Document approval and revision control
- Version tracking and distribution control
- Obsolete document removal
- Record retention policies
Welding Documentation
- Welding Procedure Specifications (WPS)
- Procedure Qualification Records (WPQR / PQR)
- Welder qualification and renewal records
- Welding coordination records and responsibilities
- Welding inspection records, including visual inspection and NDT reports
Inspection & Test Records
- Incoming inspection records verifying delivered materials and certificates
- In-process inspection records: dimensional checks, welding inspections, assembly verification
- Final inspection records: product conformity, dimensions, surface finish, customer requirements
Non-Conformance & Corrective Action
- Non-conformance reports (NCRs)
- Root cause analysis records
- Corrective and preventive action plans
- Disposition decisions (repair, rework, reject)
Internal Audit
- Internal audit schedules and checklists
- Audit reports, findings, and observations
- Corrective action and follow-up verification records
Declaration of Performance & CE Marking
- Declaration of Performance (DoP)
- CE Marking documentation
- Product identification records and technical product files
- Conformity declarations
Business benefits
What compliance does for your business
European Market Access
Legally supply CE Marked structural steel and aluminium products for construction projects across Europe and meet contractor procurement requirements.
Customer Confidence
Independent evidence that products are manufactured consistently, materials are traceable, and welding is managed correctly — a real differentiator when tendering.
Improved Quality Control
Clear production procedures, defined inspection points, and better control of fabrication activities reduce variation in product quality.
Reduced Rework and Waste
Structured controls identify fabrication errors, welding defects, and incorrect material usage before products reach customers, cutting costly rework.
Material Traceability
Effective systems for identifying and controlling materials throughout production, so every structural component can be traced back to its source materials.
Stronger Welding Controls
Standardised welding procedures, improved welder competency management, and clear responsibilities for welding supervision reduce welding-related defects.
Tendering and Business Growth
Qualify for more tenders, work with larger contractors, and expand into new market sectors that require certified suppliers.
Commitment to Quality and Safety
Demonstrates your company produces safe, reliable structural products under controlled manufacturing processes to recognised European standards.
Does Your Product Need EN 1090?
Not every fabricated steel or aluminium product falls within the scope of EN 1090. Our guide explains which products typically require certification, which are generally outside scope, and how to assess borderline cases.
In Ireland
The regulatory landscape
Regulations & standards
- Construction Products Regulation (EU) No 305/2011
- CE Marking requirements under EN 1090-1
- Harmonised European standards for structural steel and aluminium
- Irish Building Regulations and construction procurement requirements
Sectors we support
- Structural steel fabrication
- Construction and civil engineering
- Engineering and mechanical contractors
- Architectural metalwork manufacturing
Certification bodies
- NSAI (National Standards Authority of Ireland)
- EU notified bodies approved for EN 1090-1
- Accredited Factory Production Control (FPC) certification bodies
FAQs
EN 1090 Structural Steel questions, answered
What is EN 1090?
EN 1090 is the European standard that governs the fabrication of structural steel and aluminium components used in construction. It establishes the requirements for Factory Production Control (FPC), welding quality management, material traceability, inspection, and conformity assessment. Compliance with EN 1090 enables manufacturers to apply CE Marking to products within its scope, demonstrating that they meet the requirements of the Construction Products Regulation (CPR).
Is EN 1090 mandatory in Ireland?
Yes. If you manufacture structural steel or aluminium products that fall within the scope of EN 1090-1 and place them on the market in Ireland or elsewhere in the European Economic Area (EEA), you must comply with the applicable requirements of the standard and obtain certification through an approved notified body before applying CE Marking.
Which companies need EN 1090 certification?
EN 1090 applies to many businesses involved in the manufacture or fabrication of structural steel and aluminium products, including structural steel fabricators, steel frame manufacturers, aluminium fabricators, engineering companies, architectural metalwork manufacturers, steelwork contractors, manufacturers of staircases, balconies, walkways, and platforms, bridge and infrastructure fabricators, and manufacturers of structural supports and load-bearing assemblies. If your products form part of a permanent construction works and have a structural function, EN 1090 may apply to your business.
What is Factory Production Control (FPC)?
Factory Production Control (FPC) is the documented management system required by EN 1090 to ensure products are manufactured consistently and meet specified quality requirements. An FPC system typically includes procedures covering purchasing and supplier management, material identification and traceability, production controls, welding management, inspection and testing, equipment calibration, non-conformance management, corrective actions, internal audits, and document control. The FPC system is one of the primary areas assessed during certification.
What is an Execution Class (EXC)?
Execution Classes (EXC) define the technical and quality requirements that apply to a fabricated product. There are four execution classes: EXC1 for simple structures with lower risk, EXC2 for most commercial, residential, and industrial buildings, EXC3 for complex structures with higher safety requirements, and EXC4 for structures with very high consequences of failure, such as major bridges or specialist infrastructure. The appropriate execution class is normally specified by the structural designer or consulting engineer.
How long does it take to implement EN 1090?
Implementation time depends on factors such as the size of your business, existing quality management systems, the number of fabrication processes, the complexity of welding activities, current documentation, and staff experience. For many small and medium-sized fabricators, implementation can take between two and six months, depending on the level of preparation and resources available.
Do we need ISO 9001 before implementing EN 1090?
No. ISO 9001 certification is not a requirement for EN 1090 certification. However, organisations with an existing ISO 9001 Quality Management System often find implementation easier because many of the required controls — such as document control, corrective actions, internal audits, and management reviews — are already established.
Is welding certification required?
If your company carries out welding on structural steel or aluminium products covered by EN 1090, appropriate welding controls are required. This typically includes qualified welders, approved Welding Procedure Specifications (WPS), Welding Procedure Qualification Records (WPQR), welding coordination, welding inspection procedures, and records demonstrating welding quality. The exact requirements depend on the execution class and the welding processes used.
What documentation is required for EN 1090?
Typical documentation includes a Factory Production Control Manual, quality procedures, work instructions, material traceability records, inspection and testing procedures, welding documentation, calibration records, equipment maintenance records, supplier approval records, internal audit reports, training records, non-conformance reports, corrective action records, the Declaration of Performance (DoP), and CE Marking documentation. The documentation should reflect your manufacturing processes and be maintained as evidence of ongoing compliance.
What is a Responsible Welding Coordinator?
Many companies implementing EN 1090 must appoint a Responsible Welding Coordinator (RWC) to oversee welding activities. The Welding Coordinator is responsible for ensuring welding procedures are followed, welders are appropriately qualified, welding quality is maintained, welding documentation is controlled, and inspection requirements are met. The level of technical knowledge required depends on the execution class and complexity of fabrication.
What happens during the EN 1090 certification audit?
A certification audit carried out by a notified body typically includes a review of the Factory Production Control system, assessment of manufacturing processes, inspection of welding activities, review of documentation and records, verification of material traceability, inspection of quality control procedures, assessment of personnel competence, and examination of inspection and testing records. The auditor will verify that your systems are effectively implemented and operating in accordance with EN 1090 requirements.
What happens if non-conformities are identified during the audit?
Minor or major non-conformities may be raised if gaps are identified. Your company will normally be required to investigate the cause, implement corrective actions, provide evidence that issues have been resolved, and demonstrate that the corrective actions are effective. Once satisfactory evidence has been provided, certification can usually proceed.
How long is EN 1090 certification valid?
Certification is an ongoing process rather than a one-time approval. Following initial certification, notified bodies carry out regular surveillance audits to confirm that the Factory Production Control system continues to operate effectively and remains compliant with the standard.
What are the benefits of implementing EN 1090?
Implementing EN 1090 offers numerous business advantages, including legal access to the European construction market, the ability to apply CE Marking where required, increased customer confidence, improved product quality and consistency, better material traceability, reduced manufacturing errors and rework, enhanced welding quality management, stronger competitiveness when tendering for contracts, improved operational efficiency, and greater confidence in regulatory compliance.
Can small fabrication companies become EN 1090 certified?
Yes. EN 1090 applies to businesses of all sizes, from small fabrication workshops to large structural steel manufacturers. The Factory Production Control system should be proportionate to the size and complexity of the business while still meeting the requirements of the standard.
Can we implement EN 1090 ourselves?
While it is possible to implement EN 1090 internally, many companies choose to work with specialist consultants to simplify the process, reduce implementation time, and ensure that documentation and procedures meet certification requirements. Professional support can also help avoid common issues that may delay certification.
How can an EN 1090 consultant help?
An experienced EN 1090 consultant can support your business by conducting an initial gap analysis, developing a compliant Factory Production Control system, preparing required documentation, advising on welding quality requirements, assisting with material traceability systems, training employees, conducting internal audits, preparing your business for certification, and supporting you during the certification process. CE Equipment Solutions works with structural steel and aluminium fabricators across Ireland to implement practical, effective EN 1090 management systems that support successful certification and long-term compliance.
Need Support with EN 1090 Compliance?
Speak to a specialist today.